Stainless Newel Drilled/Tapped

Stainless Tapped and Drilled Newel Post with welded bottom flange. 42.4mm x 2.0mm x 1000mm(1.66" x 5/64" x 39-3/8"). This newel post is already tapped and drilled for M5 screws which hold the round bar holders to the newel post. This is a big time saver! Newel post has 10 holes drilled/tapped for an M5 Screw. Newel post can be cut down for lower railing heights. Grade 304 Stainless Steel. Bottom flange is 100mm (4") diameter - 3 bolt hole pattern. Due to the variety of floor surfaces - customers must supply the connecting hardware; i.e, screws, bolts, etc. Satin finish - 240 grain size.

Flange cover, round bar holders and handrail support sold separately.

Holes are drilled 2-3/8" from the floor and then every 4" on center going up the newel post. Top hole is 1" from the top of the newel post. Newel post can be cut down to a shorter length.